This is a two component amine cured epoxy coating. It is a fast drying, high solids, high build product. Specially
designed for new construction where fast dry to handle and over coating times are required. Can be used as
primer, mid coat, finish coat or as single coat system in atmospheric environments. Suitable for properly
prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero
surface temperatures.
Approvals and certificates
Pre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in
offshore environment, below 120 °C.
Tested in accordance with ISO 12944-5, C5-High environment
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5
and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with
IMO 2010 FTP Code Ch. 8
Consult your Jotun representative for details.
Colours
grey, grey XO, red, buff, light red
Typical use
Other variants available
Penguard Express MIO
Penguard Express ZP
Penguard Express CF
Suitable for structural steel and piping to be exposed to highly corrosive environments, C5I or C5M (ISO
12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings and mining
equipment.
Refer to separate TDS for each variant.
Additional certificates and approvals may be available on request.
Other
Approved 1