Designed to reduce flammability of fuel. It helps in delay the spread of flame and surface ignition on specified building surfaces. It is recommended to be used on internal lining, wall and ceilings.

PHYSICAL CHARACTERISTIC
Density : 1.2 ± 0.2 Kg/Liter
Coverage : 8 - 10 m2/Liter
Colors : Off White
Gloss : Matt
Expansion Ratio : -1:25
Expansion Temperature : -300C

APPLICATIONS DETAILS
Dry Film Thickness : 50-100 microns per coat
Drying Time
1) Touch Dry : 2 – 3 hours
2) Hard Dry : 48 - 72 hours (min), 24 hours (max)
Recoating Interval : 24 hours
No. of Coats : Minimum 2 coats
Precaution : Dilution strictly is not allowed.
Shelf life, after opened : 6 months
Keep container tightly closed. Keep below 30oC

SURFACE PREPARATION
General/ New: Surface must be sound, clean, dry and free from all loose and flaking material ,dirt, grease or other surface contaminants. . To have better finish, rub down previously painted surface with a fine waterproof abrasive paper and rinse thoroughly.
Previously painted: Remove all loose, defective and unstable paint film or powdery residues by thorough brushing and scraping. Make good minor defects and cracks with suitable grade filler.

CONDITION DURING APPLICATION
The surfaces should be completely free of dust, grease, oil and rust. The application can be executed by hand (roller or brush) or with the help of application equipment (airless spray equipment). The temperature of the substrate and the surrounding has to be at least +5C. The humidity must not exceed 95% rel. humidity.

STORAGE
The product must be stored in accordance with national regulations. Storage conditions are to keep the containers under shed, away from direct sunlight and extreme temperatures. Do not stock paint material near to any ignition sources. Do not put back the half or unused material backs in original container, containing the supplied paint, to avoid contamination.

PACKAGING
5LTR @ 20 LTR