Description
Three component epoxy resin to waterproof both with negative and positive pressure, to be used as osmotic over underground walls, to encapsulate rising dampness and to achieve a vapour barrier on wet supports.
Key benefits:
Resistant up to 9.5 ATM of negative pressure (counterthrust).
No excavation or demolition if applied inside.
It is used as water barrier onto ground walls in Diasen Dehumidifying System (in combination with Diathonite Rinzaffo and Diathonite Deumix – see technical data sheets)
Excellent waterproofing, consolidating and filling abilities.
Multipurpose.
It acts as vapour barrier on concrete supports.
It avoids removal and disposal of old plasters.
Easy to plaster, to paint over and to tile.
Solvent free.
Features:
Aspect: Paste
Components: Three-component (A+B+C)
Impermeability: Positive pressure: 9.5 ATM - 132.3 psi
Impermeability: Negative pressure: 9.5 ATM
Adhesion to cementicious support: 2.5 N/mm2 - 362.59 lbf/in2 (good)
Adhesion to tuff: 3.0 N/mm2 - 435.11 lbf/in2 (good)
Adhesion to chipping floor: 1.5 N/mm2 - 217.56 lbf/in2 (good)
Adhesion to expanded polyurethane panel: 1.25 N/mm2 (good)
Adhesion on EPS: 1.5 N/mm2.
Adhesion to glazed ceramic tile: 2.5 N/mm2 - 362.59 lbf/in2 (good)
Adhesion WATstop + Acriflex Winter to polyurethane foam: 1.83 N/mm2 - 265.42 lbf/in2 (good)
Pot Life: 2 hours at 20°C - 68°F and 40% relative humidity level (high temperatures decrease workability time)
Key benefits:
Resistant up to 9.5 ATM of negative pressure (counterthrust).
No excavation or demolition if applied inside.
It is used as water barrier onto ground walls in Diasen Dehumidifying System (in combination with Diathonite Rinzaffo and Diathonite Deumix – see technical data sheets)
Excellent waterproofing, consolidating and filling abilities.
Multipurpose.
It acts as vapour barrier on concrete supports.
It avoids removal and disposal of old plasters.
Easy to plaster, to paint over and to tile.
Solvent free.
Features:
Aspect: Paste
Components: Three-component (A+B+C)
Impermeability: Positive pressure: 9.5 ATM - 132.3 psi
Impermeability: Negative pressure: 9.5 ATM
Adhesion to cementicious support: 2.5 N/mm2 - 362.59 lbf/in2 (good)
Adhesion to tuff: 3.0 N/mm2 - 435.11 lbf/in2 (good)
Adhesion to chipping floor: 1.5 N/mm2 - 217.56 lbf/in2 (good)
Adhesion to expanded polyurethane panel: 1.25 N/mm2 (good)
Adhesion on EPS: 1.5 N/mm2.
Adhesion to glazed ceramic tile: 2.5 N/mm2 - 362.59 lbf/in2 (good)
Adhesion WATstop + Acriflex Winter to polyurethane foam: 1.83 N/mm2 - 265.42 lbf/in2 (good)
Pot Life: 2 hours at 20°C - 68°F and 40% relative humidity level (high temperatures decrease workability time)